Isn’t it time you took steps to enhance the aesthetics of your room? Although there are several ways to achieve this goal, you’ll want to think about adding a texture to your wall. Doing so will help hide drywall flaws and other blemishes. Another thing to note is that adding a texture to the wall won’t be difficult. However, you’ll need to take steps to find out which texture is going to work best for you.
Within this guide, you’ll learn more about the different types of wall textures.
Types Of Wall Textures
Before attempting to add a texture to your wall, you’ll need to properly prepare it first. To do that, you should clean and sand the wall. Doing so helps ensure that dust and dirt won’t get stuck in the paint. When mixing the mud, it is pertinent to get a pancake batter consistency before applying it.
The comb texture is one of the most popular. With this texture, your wall will feature several grooves. You’ll need to apply the texture with a trowel. You can play around with the texture a bit until you get exactly what you want. For instance, you can make it intricate or simple. To create this texture, you’ll want to add the drywall mixture to the wall. Then, you can use the teeth of the trowel to create it.
If you’re new to drywall, you’ll want to experiment with the knockdown texture. It is easier to achieve and more forgiving. Therefore, you won’t have to worry about making mistakes. You’ll also appreciate the rustic appearance it provides. To begin, you’re going to need a few tools. For instance, you’ll need a spray texture gun, hopper, bucket, extension pole, and a knockdown knife. Be sure to cover walls and everything else with a plastic sheet.
Once you’ve done that, you’ll want to stir the texture in the bucket and add it to the gun. Then, you can spray the texture on the ceiling or wall. Be sure to work in small sections. After that, you’ll want to wait up to 15 minutes before using your knife to flattening the peaks of the texture. You’ll want to move the knife straight across the wall or ceiling. Be sure to wipe it with a rag regularly.
Many people are looking for a retro design. If you fit into this category, you’ll want to try the orange peel texture. As the name suggests, this texture features a smooth layer of plaster with bumps or dimples here and there. Using the orange peel texture is a good way to hide flaws and holes. Once you’ve cleaned the wall, you’ll need to prime it. Then, you can apply it using a hopper gun.
Since the 1970s, many homes have feature popcorn ceilings. The texture is very popular because it helps cover up imperfections. In addition to this, it can help prevent sound from coming from above. The texture requires certain materials including Styrofoam. One thing you’ll appreciate is that this texture is easy to apply. You’ll need the texture, a hopper gun, and an air compressor. You’ll need to prime the surface before applying the texture using the hopper gun.
The sand swirl texture is a good option because it’ll add life to any room. When you’ve finished, the wall will feature half-circles. You’ll be able to paint them whatever color you wish. You’ll need to add sand to the mixture to create this texture. Just remember that the drywall mud needs to be a bit thinner. You’ll want to add a small layer to the wall using a roller. Then, you can use a bristle brush to finish the sand swirl pattern. You’ll need to let the texture dry for at least 24 hours before priming and painting it.
Slap Brush Texture
DIYers will love the slap brush texture because it is easy to deal with. Even if you’ve never used a hopper gun before, it won’t matter. You won’t need one. The texture will leave a random pattern of lines on the wall. You won’t need much to complete this texture. You’ll need a slap brush, roller, and drywall compound. The compound should be mixed with water until it becomes the consistency of paint. Then, you’ll want to paint it across the wall.
Then, the drywall coating needs to be added to a brush. Be sure to slap the brush onto the wall in certain areas. There is no need to follow a certain pattern. Experiment with it until you get what you want. Again, you’ll need to wait 24 hours or longer before priming and painting the surface.
Finally, you’ll want to think about using the stomp texture. It is a good option for ceilings. You can create this texture by using a brush to stamp it on. You’ll need to thin down the drywall mud. Then, you can apply it using a spray gun or nap roller. Make sure that the drywall mud is consistently applied. Then, you can use a stomp brush to finish the texture. You may need to remove high spots. You can do so using a knockdown knife.
Do you need assistance picking the best texture for your walls? If so, it would be a good idea to team up with a qualified professional. There are more textures to experiment with so you’ll want to research and find out what works well for you.